How to Install of Dome Type Camp?
Dome Type Camp – Ok you probably know how to put the tent without having to read the booklet provided! (Almost all men will say so). And all the tents that have two poles across the middle… But I am here for some tips!
1. Remove the tent and fabric sites (ground Cloth), in fact most of the camp sites were not included cloth and you must buy it separately? Base fabric is to make sure your tent is basically dry! But the fabric is so expensive to replace the cloth is what you said … just use plastic garbage.
2. Open the fabric site, and your tent is fully open. Remove the pole and spikes and rope belt and put in different places.
3. Install a pole in the tent was one of the most important and most fun in the process of installing this camp. Almost all types of dome tents with the column are connected to the rubber. And if you throw this column you hold at the end of the pole, it will automatically connect…
4. Next enter the columns that are available outside the tent into the hole from one side to the opposite side. Make sure the pole is not interrupted in the middle.
5. After the pole looks like the letter X, now you will set up the tent. Place the tip of the pole in the tent with a hole. And make sure your friend also was the same thing on the opposite side. When you enter the column you want to bend the poles to form D. Repeat this process for another column.
6. Next install a fabric shower (cloth outside) the installation of this cloth is the same way with the installation of the tent just now.
7. Well finished dome tent. Now back to the base fabric. Woof site must be put right under the tent. Woof site should be no bigger than your tent. This is because if it rains the water will stagnate in the base fabric and the water will come into your tent through the camp. (Mostly camp is made of sack cloth and waterproof.) Ensure that the site is clean cloth and do not come off.
8. At present you may think you are ready and you may have items in your bag to be put in camps, this is true if you went to the area have strong winds. But if you visit the area with strong winds, please make sure you install spike alongside your tent.
9. Sprinkle with coarse salt sulfur or around your tent to avoid the poisonous animals into your tent.
10. Next place the bag tent camps and equipment not in use, such as excessive spike in the tent so as not to lose.
11. To re-do the same as installing the tent camp, but in reverse. But please make sure your tent is dry before re-roll and the tent when the tent at home to make sure it is working.
These tips are provided for those who never went camping. However, please make sure your camp site clean to avoid the poisonous animals and so on.
